- Permanent color fastness- vitrified shale
- Far exceed ASTM C902-Pedestrian/Light Traffic & C1272-Heavy Vehicular Traffic
- All pavers exceed application PX for tolerance: "+/- 1/8". (except for Rumbled®)
- Average compressive strength: 12,178 psi
- Average Absorption: 4.43%
- Freeze Thaw Cycles: 150+
- Passes CSA-A231.2 freeze thaw test in saline solution
- British Pendulum Test (skid resistance): 74.5
- Average Coefficient of Friction (ASTM C1028): 1.10 dry, 0.98 wet
Specification Enhancements
We suggest the following enhancements to our
standard specifications to insure the highest quality of product
for your project:
…..in addition to conforming
to the PX application, the dimensional tolerances around the
mean values for length, width, and depth shall be 1/16 of
an inch. (Studies show that dimensional tolerances
are directly linked to joint width size and proper interlock)
…..the average cold water absorption
shall not be greater than 6% with no individual unit greater
than 7%. Absorption test results may not be achieved through
the use of sealers or other products applied to the clay paver.
(Sealer protection degradates over time requiring re-application
after several years)
…..the clay paver must pass
CSA-A231.2 freeze thaw test in saline solution without the
use of sealers or other products applied to the paver.
(Salt is the most common substance used for de-icing during
the winter months. See TechBullet #1)
…..The contractor shall ensure
that the manufacturer conduct a test sampling of 24 pavers
for every 50,000 pavers manufactured to determine the paver’s
compliance with dimensional and water absorption characteristics.
The 24 paver sample shall be representative of the color mix
in the typical finished package and chosen on a consistent
basis from one kiln car. (Proper control procedures
and testing are standard operating principles for high quality
manufacturers.)
Product Specifications
English Edge® - Features and Specifications:
Pine Hall Brick's English Edge® pavers are manufactured to conform to the American Society for Testing and Materials (ASTM) specification standards C902, (Class SX, Type 1, Application PX) and C67 for freeze and thaw.
Features: Chamfers on both bed surfaces for reversibility; spacer nibs to control joint size and chippage; full range, through the body color eliminates color fading; exceeds ASTM standard with over 10,000 p.s.i. compressive strength. Meets PX application on dimensional tolerance. Colors: red, red flash (full range), buff, ironspot, autumn, dark accent & rose flash (full range).
Specification: Unit clay paver shall conform to the requirements of ASTM C902, Class SX, Type 1, Application PX. The units shall be standard 4" x 8" size having dimensions of 2 1/4" x 4" x 8" (including spacer nibs on the side), chamfered edges on both bed surfaces, 10,000 psi minimum compressive strength and below 6% cold water absorption. Paver shall conform to English Edge® [color] brick pavers as manufactured by Pine Hall Brick Co., Inc., Winston-Salem, North Carolina and distributed by [party responsible for specification].
Old Towne, Old Tavern, Old South and Old Mill - Features and Specifications:
Pine Hall Brick's Old Towne, Old Tavern, Old South and Old Mill pavers are manufactured to conform to the American Society for Testing and Materials (ASTM) specification standards C902, (Class SX, Type 1, Application PX) and C67 for freeze and thaw.
Features: Old Series: Textured edges and "torn" face texture for aged appearance; ceramic penetrating color for additional antique look; full relieved edge controls chippage; exceeds ASTM standard with over 8,000 p.s.i. compressive strength. Colors: Old Towne- red flash with random black & white “paint smears”, Old Tavern- burgundy blue flash, Old South- salmon orange flash, Old Mill- gray/brown blend.
Specification: Unit clay paver shall conform to the requirements of ASTM C902, Class SX, Type 1, Application PX. The units shall be standard 4" x 8" size having dimensions of 2 1/4" x 4" x 8", having textured edges and below 6% cold water absorption. Paver color shall conform to [color] brick pavers as manufactured by Pine Hall Brick Co., Inc., Winston-Salem, North Carolina and distributed by [party responsible for specification].
Rumbled® Pavers - Features and Specifications:
Pine Hall Brick's Rumbled® pavers are manufactured to conform to the American Society for Testing and Materials (ASTM) specification standards
C902 (Class SX, Type 1, Application PA) and C67 for freeze and thaw.
Features: Tumbled after firing for aged appearance; exceeds ASTM standard with over 10,000 p.s.i. compressive strength. Colors: red flashed (full range), red, ironspot, rose flash (full range) and Main Street.
Specification: Unit clay paver shall conform to the requirements of ASTM C902, Class SX, Type 1, Application PA. The units shall be standard 4" x 8" size having dimensions of 2 ¼” x 4" x 8", 10,000 psi minimum compressive strength and below 6% cold water absorption. Paver color shall conform to [color] as manufactured by Pine Hall Brick Co., Inc., Winston-Salem, North Carolina and distributed by [party responsible for specification].
Pathway and Cocoa - Features and Specifications:
Pine Hall Brick's Pathway and Cocoa brick pavers are manufactured to conform to the American Society for Testing and Materials (ASTM) specification standards C902, (Class SX, Type 1, Application PX) and C67 for freeze and thaw.
Features: 2 1/4" thick square edge brick pavers available in 4"X 8" (modular sizes in red and red flash only). Colors: Pathway-red or red flash (full range), Cocoa-chocolate flash (full range).
Specification: Unit clay paver shall conform to the requirements of ASTM C902, Class SX, Type 1, Application PX. The units shall be standard 4" x 8" (or standard modular) size having dimensions of 2 1/4" x 4" x 8" (or 2 1/4" x 3 5/8" x 7 5/8"), square edges, 10,000 psi minimum compressive strength and below 6% cold water absorption. Paver color shall conform to [color] brick pavers as manufactured by Pine Hall Brick Co., Inc., Winston-Salem, North Carolina and distributed by [party responsible for specification].
Brookstown, Harbourtown and Carytown - Features and Specifications:
Pine Hall Brick's thin brick pavers are manufactured to conform to the American Society for Testing and Materials (ASTM) specification standards C902, (Class SX, Type 1, Application PX) and C67 for freeze and thaw.
Features: 1 3/8" thin square edge pavers available in: Brookstown-red or red flash (full range) 4" X 8" or modular, Harbourtown-chocolate flash (full range) 4" X 8" or modular or Carytown-rose flash (full range) modular.
Specification: Unit clay paver shall conform to the American Society for Testing and Materials (ASTM) specification standards C902, Class SX, Type 1, Application PX. The units shall be standard 4" x 8" (or standard modular) size having dimensions of 1 3/8" x 4" x 8" (or 1 3/8" x 3 5/8" x 7 5/8"), square edges, 10,000 psi minimum compressive strength and below 6% cold water absorption. Paver color shall conform to [color] brick pavers as manufactured by Pine Hall Brick Co., Inc., Winston-Salem, North Carolina and distributed by [party responsible for specification].
Heavy Vehicular Paver Specifications
English Edge® Heavy Duty 2 3/4" - Features and Specifications:
Pine Hall Brick's English Edge® Heavy Duty pavers are manufactured to conform to the American Society for Testing and Materials (ASTM) specification standards C1272, (Type F, Application PX).
Features: Spacer nibs & beveled edges to control joint size and chippage; full range, through the body color eliminates color fading; exceeds ASTM standard with over 10,000 p.s.i. compressive strength and less than 6% cold water absorption. Meets PX application on dimensional tolerance. Colors: red & red flash (full range). Note: other colors may be available.
Specification: Unit clay paver shall conform to the requirements of ASTM C1272, Type F, Application PX. The units shall be standard 4" x 8" size having dimensions of 2 3/4" x 4" x 8" (including spacer nibs on the side), chamfered edges, 10,000 psi minimum compressive strength and below 6% cold water absorption. Paver color shall conform to English Edge® [color] heavy duty brick pavers as manufactured by Pine Hall Brick Co., Inc., Winston-Salem, North Carolina and distributed by [party responsible for specification].
2 1/4" Type R - Features and Specifications:
Pine Hall Brick's 2 1/4" pavers are manufactured to conform to the American Society for Testing and Materials (ASTM) specification standards C1272, (Type R, Application PX).
Features: full range, through the body color eliminates color fading; exceeds ASTM standard with over 10,000 p.s.i. compressive strength and less than 6% cold water absorption. Meets PX application on dimensional tolerance. Colors: depends on paver selected.
Specification: Unit clay paver shall conform to the requirements of ASTM C1272, Type R, Application PX. The units shall be standard 4" x 8" (or standard modular) size having dimensions of 2 1/4" x 4" x 8" (or 2 1/4" x 3 5/8" x 7 5/8"), ___________edges, 10,000 psi minimum compressive strength and below 6% cold water absorption. Paver color shall conform to _______________ brick pavers as manufactured by Pine Hall Brick Co., Inc., Winston-Salem, North Carolina and distributed by [party responsible for specification].
|
